Разное
Последние книги
Самое популярное
Все бесплатно
Все ссылки на файлы, расположенные на страницах сайта, добавлены пользователями и доступны для бесплатного скачивания. За содержание этих файлов администрация сайта ответственности не несет.
Навигация
Вопросы
ZylBattery v1.26 (dcu,bpl)
|
2293 | |
ZylBattery v1.26 (dcu,bpl)Комментариев: 0 | Опубликовано: 8.03.2013 Категория: Delphi » Delphi-компоненты ZylBattery 1.26 ZylBattery is a visual Delphi component that diplays the charging level of the battery in a chart. You can specify different colors for different charging levels and you can indicate it also in text format in percents. Test Only Win7 x64 Delphi XE3. D7, D2007, D2009, D2010, XE, XE2 x86 only, XE3 x86 only |
||
|
ZylCPUUsage v2.07 (dcu,bpl)
|
2346 | |
ZylCPUUsage v2.07 (dcu,bpl)Комментариев: 0 | Опубликовано: 8.03.2013 Категория: Delphi » Delphi-компоненты ZylCPUUsage 2.07 ZylCPUUsage is a visual Delphi & C++Builder component that diplays the usage level of the processor(s) in a chart. Test Only Win7 x64 Delphi XE3. D7, D2007, D2009, D2010, XE, XE2 x86 only, XE3 x86 only |
||
|
ZylSerialPort v1.56 (dcu,bpl)
|
3003 | |
ZylSerialPort v1.56 (dcu,bpl)Комментариев: 0 | Опубликовано: 8.03.2013 Категория: Delphi » Delphi-компоненты ZylSerialPort 1.56 ZylSerialPort is a Delphi & C++Builder thread based asynchronous serial port component. Use ZylSerialPort component to easily communicate with external devices on serial port connection, such as modems, bar code readers, GSM modules and others. You can use it also with USB, IrDA and Bluetooth devices, because these devices have a driver that redirects the input from the USB, IrDA or Bluetooth port to a virtual serial port (you can check it in System/Device Manager/Ports). If your USB device is not provided with such a driver, then use a USB controller whose vendor provides a virtual serial port driver, such as FTDI or use a USB/RS-232 adapter. Test Only Win7 x64 Delphi XE3. D7, D2007, D2009, D2010, XE, XE2 x86 only, XE3 x86 only |
||
|
Absolute Database v7.12 MultiUser Full Source ONLY
|
2926 | |
Absolute Database v7.12 MultiUser Full Source ONLYКомментариев: 0 | Опубликовано: 1.03.2013 Категория: Delphi » Delphi-компоненты - version 7.12 (02/18/2013) Bugs fixed: 1. Error with intrenal Zlib decompression is fixed. |
||
|
LMD 2013.2 Complete FS - Delphi 6-XE3 / C++ Builder 6-XE3 - 32 / 64 bit
|
3695 | |
LMD 2013.2 Complete FS - Delphi 6-XE3 / C++ Builder 6-XE3 - 32 / 64 bitКомментариев: 0 | Опубликовано: 21.02.2013 Категория: Delphi » Delphi-компоненты LMD 2013.2 Complete FS - Delphi 6-XE3 / C++ Builder 6-XE3 - 32 / 64 bit Incl. Demo + Help files LMD VCL Complete 2013.2 (5 feb. 2013) Contains LMD-Tools, IDE-Tools and LMD ElPack 2013 Delphi XE3 release contains 32bit + 64bit support. More than 685 native components for any kind of task. Full sourcecode of all controls included All features of the most current platform release: LMD-Tools, ElPack and LMD IDE-Tools. Extensive demo projects with sourcecode |
||
|
TMS Instrumentation Workshop v2010 ported for XE3
|
3753 | |
TMS Instrumentation Workshop v2010 ported for XE3Комментариев: 0 | Опубликовано: 9.02.2013 Категория: Delphi » Delphi-компоненты TMS Instrumentation Workshop is a library full of components, methods and routines enabling you to create professional looking instrumentation and multimedia applications. A set containing over 80 instrumentation and digital components like leds, scopes, banners, sliders, knob controls, buttons, meters, panels with customized backgrounds and much more. |
||
|
RDPrint - definitive solution for all models MATRIX printers
|
4349 | |
RDPrint - definitive solution for all models MATRIX printersКомментариев: 0 | Опубликовано: 8.02.2013 Категория: Delphi » Delphi-компоненты RDprint is the definitive solution in the preparation of reports for printing professionals quickly and accurately on all models MATRIX printers, Inkjet and Laser. The component RDprint has features for printing characters with font size and style varied accents, character printing graphics and semi-ASCII commands, printing aligned values; possesses resources and Setup Preview, and besides printing allows your reports saved in files for later viewing or printing. Ideal for printing, quickly, efficiently and with ease, Invoice, Invoices, Checks and all kinds of reports. If you've programmed in MS-DOS (COBOL, Clipper etc.) will certainly find the RDprint simply FANTASTIC and will have no problem using it, and if you are starting now, do not worry because we offer several examples with sources that will facilitate its use. |
||
|
Bass24 +Sample Demos + bass.PAS and addons x32/x64
|
4077 | |
Bass24 +Sample Demos + bass.PAS and addons x32/x64Комментариев: 0 | Опубликовано: 21.01.2013 Категория: Delphi » Delphi-компоненты BASS is an audio library for use in software on several platforms. Its purpose is to provide developers with powerful and efficient sample, stream (MP3, MP2, MP1, OGG, WAV, AIFF, custom generated, and more via OS codecs and add-ons), MOD music (XM, IT, S3M, MOD, MTM, UMX), MO3 music (MP3/OGG compressed MODs), and recording functions. All in a compact DLL that won't bloat your distribution. |
||
|
Apollo Database Server v7.2
|
3171 | |
Apollo Database Server v7.2Комментариев: 0 | Опубликовано: 21.01.2013 Категория: Delphi » Delphi-компоненты Features: Apollo Server is built using Apollo 7.2 Enables Apollo 7 applications to connect and manage DBF/Xbase database files remotely (client/server) Only 5 lines of code to make your Apollo 7 applications work with the Apollo Server SQL-92 support High-speed, secure TCP/IP access to Clipper, FoxPro 2.6 and Apollo DBF/Xbase databases 700KB Server footprint 10 to 30 times faster performance over embedded multi-user applications Server Manager utility manages users and database aliases Improves data integrity in multi-user environments Reduces network traffic in multi-user environments Minimal data is sent between client application and server Eliminates Windows file sharing and file locking performance issues on shared networks Does not require expensive hardware to run, works great on desktop-class machines Royalty free unlimited distribution |
||
|
USBPhysic DLL Component v1.1.0 (x86/32-bit)
|
4095 | |
USBPhysic DLL Component v1.1.0 (x86/32-bit)Комментариев: 0 | Опубликовано: 20.01.2013 Категория: Delphi » Delphi-компоненты USBPhysic is a stand-alone component ( 32/64-bit Windows dynamic-link library - DLL ) that can be used to extract the physical vendor information from almost any USB (Universal Serial Bus) storage device. With USBPhysic you can get the manufacturer serial number, manufacturer name and so on, of the external portable Hard Drives, flash/pen/key drive or any other kind of USB Storage Device. The USB storage device serial number is a unique number/string per device and this offers you a chance to programmatically identify the actual device. Let's say you want a way to lock your software to a USB storage device (a small flash pen), or distribute your software only with a USB stick, a fast and reliable way to do that is by generating a serial number based on that USB device serial (the hardware serial number that can not be changed, even after a full format). The physical serial number is not the same as the volume serial number, it will not change after a format, and there is no way to change it unless you change the actual device. |
||
|
Apollo Embedded Version 7.2
|
3747 | |
Apollo Embedded Version 7.2Комментариев: 0 | Опубликовано: 18.01.2013 Категория: Delphi » Delphi-компоненты Apollo Embedded 7.2 http://www.apollodb.com/products.asp Embedded database engine for developing applications that manage CA-Clipper and FoxPro 2.6 DBF database files locally or on a shared LAN environment. Includes ADO.NET Data Provider for .NET, native VCL components for Delphi & C++Builder, OLEDB Data Provider for ADO, COM objects, and components for classic ASP web pages. Note: Apollo 7.2 supports developing 32-bit Windows 8 and Windows 7 applications. Windows RT is not supported. CRUD support for DBF/NTX/DBT, DBF/CDX/FPT, DBF/NSX/SMT files RAD Studio XE3, XE2, XE, 2010, 2009, 2007 Delphi XE3, XE2, XE, 2010, 2009, 2007, 2006, 2005, 7, 6, 5 C++Builder XE3, XE2, XE, 2010, 2009, 2007, 2006, 6, 5 Visual Studio 2012, 2010, 2008, 2005, 2003 .NET 4.5, 4.0, 3.5, 3, 2, 1.1 OLEDB Provider and COM objects for VB, VC++, ASP |
||
|
DevArt SecureBridge v5.0.2 For Delphi & BCB Full.Source
|
3549 | |
DevArt SecureBridge v5.0.2 For Delphi & BCB Full.SourceКомментариев: 0 | Опубликовано: 17.01.2013 Категория: Delphi » Delphi-компоненты SecureBridge - Network Security and Data Protection Solution SecureBridge is a set of network security and data protection solutions that can protect any TCP traffic using SSH or SSL secure transport layer protocols that provide authentication for both client and server, strong data encryption, and data integrity verification. SecureBridge components can be used in conjunction with data access components to prevent data interception or modification in an untrusted network. Our security solution is very convenient in setup and usage. It is enough to place several components on the form and specify the server address and the user login information to establish a secure connection. Applications that have to work with secure information are easy to deploy, as they do not require any external files. |
||
|
Berg Soft Next Suite 5 1.2013 (VCL) Delphi 7-XE3 Full Source
|
3354 | |
Berg Soft Next Suite 5 1.2013 (VCL) Delphi 7-XE3 Full SourceКомментариев: 0 | Опубликовано: 16.01.2013 Категория: Delphi » Delphi-компоненты Jan 15 2013 ----------- -- Next Common --  fixed: Bug fixes and internal tweaks.NextGrid v5.8 -- added: Count property to InsertRow method. fixed: Bug fixes and internal tweaks. NextDBGrid v5.8 -- fixed: Bug fixes and internal tweaks.NextInspector v5.8 -- added: AutoExpand Boolean property. When set to true, item will be expanded on select. added: OnPropertyLoad event. Occur after LoadProperties method is called. added: OnPropertyLoaded event. |
||
|
Firemonkey Premium Style for RAD Studio XE3
|
4913 | |
Firemonkey Premium Style for RAD Studio XE3Комментариев: 1 | Опубликовано: 13.01.2013 Категория: Delphi » Delphi-компоненты In RAD Studio XE3, we introduced bitmap-based user interface styling for FireMonkey. This supports creating custom UI styles for Windows, Mac, and Mac with Retina displays. It also includes support for non-client area styling on both Windows and Mac, allowing you to apply a custom UI style throughout the entire application (including the application title bar and window controls). |
||
|
DevArt dbExpress Driver for Oracle v6.1.2 (25-Dec-12)
|
2523 | |
DevArt dbExpress Driver for Oracle v6.1.2 (25-Dec-12)Комментариев: 0 | Опубликовано: 12.01.2013 Категория: Delphi » Delphi-компоненты dbExpress is a database-independent layer that defines common interface to provide fast access to Oracle from Delphi and C++Builder on Windows and Mac OS X for both 32-bit and 64-bit platforms. For this server, dbExpress provides a driver as an independent library that implements the common dbExpress interface for processing queries and stored procedures. As data-access layer is thin and simple, dbExpress provides high performance database connectivity and is easy to deploy. You can use our driver in the same way as the one supplied by Embarcadero. dbExpress driver for Oracle provides direct high performance access to Oracle database server. It provides both possibility of connection to Oracle by means of native Oracle data access and direct access to Oracle without Oracle Client |
||
|
DevArt dbExpress Driver for InterBase v4.1.2 (25-Dec-12)
|
2334 | |
DevArt dbExpress Driver for InterBase v4.1.2 (25-Dec-12)Комментариев: 0 | Опубликовано: 12.01.2013 Категория: Delphi » Delphi-компоненты dbExpress is a database-independent layer that defines common interface to provide fast access to InterBase/Firebird from Delphi and C++Builder on Windows and Mac OS X for both 32-bit and 64-bit platforms. For these servers, dbExpress provides a driver as an independent library that implements the common dbExpress interface for processing queries and stored procedures. As data-access layer is thin and simple, dbExpress provides high performance database connectivity and is easy to deploy. You can use our driver in the same way as the one supplied by Embarcadero. dbExpress driver for InterBase and Firebird provides access to InterBase, Firebird and Yaffil databases. It directly uses InterBase client software to connect to server. The driver requires InterBase client to be installed on the client side. |
||
|
DevArt dbExpress Driver for MySQL v6.1.2 (25-Dec-12)
|
2999 | |
DevArt dbExpress Driver for MySQL v6.1.2 (25-Dec-12)Комментариев: 0 | Опубликовано: 12.01.2013 Категория: Delphi » Delphi-компоненты dbExpress is a database-independent layer that defines common interface to provide fast access to MySQL from Delphi and C++Builder on Windows and Mac OS X for both 32-bit and 64-bit platforms. For this server, dbExpress provides a driver as an independent library that implements the common dbExpress interface for processing queries and stored procedures. As data-access layer is thin and simple, dbExpress provides high performance database connectivity and is easy to deploy. You can use our driver in the same way as the one supplied by Embarcadero. dbExpress driver for MySQL provides access to MySQL database. It can work using native MySQL network protocol or MySQL client. If you do not use Direct mode, MySQL client library is required. |
||
|
DevArt dbExpress Driver for PostgreSQL v3.1.2 (25-Dec-12)
|
2538 | |
DevArt dbExpress Driver for PostgreSQL v3.1.2 (25-Dec-12)Комментариев: 0 | Опубликовано: 12.01.2013 Категория: Delphi » Delphi-компоненты dbExpress is a database-independent layer that defines common interface to provide fast access to PostgreSQL from Delphi and C++Builder on Windows and Mac OS X for both 32-bit and 64-bit platforms. For this server, dbExpress provides a driver as an independent library that implements the common dbExpress interface for processing queries and stored procedures. As data-access layer is thin and simple, dbExpress provides high performance database connectivity and is easy to deploy. You can use our driver in the same way as the one supplied by Embarcadero. dbExpress driver for PostgreSQL provides direct high performance access to PostgreSQL database server. It directly connects to the server without using PostgreSQL client software. |
||
|
HierCube VCL 4.70.0
|
3829 | |
HierCube VCL 4.70.0Комментариев: 0 | Опубликовано: 10.01.2013 Категория: Delphi » Delphi-компоненты HierCube for VCL versions history HierCube VCL 4.70.0 (October 23, 2012): New features: Delphi XE3 support; HierCube VCL 4.61.0 (July 23, 2012): New features: Delphi XE2 Update 4 support. |
||
|
RxLibrary 2.75 1.010 for Delphi 2005-XE3
|
4669 | |
RxLibrary 2.75 1.010 for Delphi 2005-XE3Комментариев: 0 | Опубликовано: 9.01.2013 Категория: Delphi » Delphi-компоненты Неофициальная стабильная версия RxLibrary с поддержкой Delphi XE3 Last stable version of RxLibrary for Delphi 2005, 2006, 2007, 2009, 2010, XE, XE2 and XE3 Unofficial version to download from there unRxLib 275 1.010 (1.09 MB). |
||
|
Intraweb v12.2.12.1 for Delphi XE2
|
3596 | |
Intraweb v12.2.12.1 for Delphi XE2Комментариев: 0 | Опубликовано: 8.01.2013 Категория: Delphi » Delphi-компоненты Saving and loading position and form size from registry using monospaced font for better code visualization/editing (Courier New) TIWOrderedListBox: Added possibility to use simple strings as items property, not only Name=Value pairs TIWProgressIndicator rendering was completely rewritten. Bugs fixed, new properties and functionalities added. TIWStyleRenderOptions now have default values (all TIWControl descendants). TIWStyleRenderOptions default values won't be saved to DFM files, and you will have smaller DFM files. |
||
|
Envision Image Library V2.58 FullSource for CB6,D7-DX3
|
3510 | |
Envision Image Library V2.58 FullSource for CB6,D7-DX3Комментариев: 0 | Опубликовано: 7.01.2013 Категория: Delphi » Delphi-компоненты The Envision Image Library*augments Borland's Delphi, C++ Builder, and the*Developers Studio*with powerful imaging capabilities. The library provides image file I/O for popular file formats, printing, scanning, and image processing features. It is for Win32 development using versions*7 of Delphi,*C++ Builder*6, and BDS 2005, 2006 and Rad Studio 2007, 2009, 2010, XE, XE2-32 bit, XE3-32 bit.* Integrated with the VCL's TImage component* Easy to use image viewer component with rubberbanding support* Supports popular file formats:* Comprehensive TIFF (Packbits, CCITT group 3, 1d and 2d,* group 4, JPEG compression, Deflate compression, LZW is not supported for legal reasons, multi-page read and write) PNG, JPEG, BMP, PCX, DCX, TGA, ICO, WMF, EMF, PPM, EPS (preview only)* TWAIN scanning Annotations Flexible image printing (original size, full page, specific width, specific height, specific width and height, stretch to page)* Image processing: Anti-aliasing, brightness, contrast, convert to gray, edge detection, emboss, sharpen, smooth, flip vertical and horizontal, gamma adjustment, negative, interpolated resize, rotate 90, 180, 270 and arbitrary angle, cropping, format conversion including Floyd Steinberg dithering and color quantization* OCR (optical character recognition) *interface Executable programs produced with the library may be distributed royalty free. Does not require external DLL's. Includes complete source code. |
||
|
EMS Advanced Query Builder v3.9.1.1 Full Source
|
3912 | |
EMS Advanced Query Builder v3.9.1.1 Full SourceКомментариев: 0 | Опубликовано: 6.01.2013 Категория: Delphi » Delphi-компоненты Advanced Query Builder is a powerful component suite for BorlandВ® DelphiВ® and C++ BuilderВ® intended for visual building SQL statements for the SELECT, INSERT, UPDATE and DELETE clauses. It allows you to build new queries visually and/or graphically represent the existing queries in your own applications. The suite includes components for working with standard SQL, MS SQL, InterBase/Firebird, MySQL, PostgreSQL and many more dialects. Advanced Query Builder enables users to make up large and complicated SQL queries with unions and subqueries for different servers without any knowledge of the SQL syntax. Key Features Creation of queries with unions and subqueries Standard SQL, InterBase/Firebird, MySQL, PostgreSQL, Oracle, DB2 and DBISAM support Detailed help system and a demo application for a quicker mastering of the product Powerful component and property editors, which allow to set easily many query building parameters at the design-time High productivity even on slow computers Powerful SQL parser, which allows you to represent complicate SQL statements visually Creating TxxxQueryBuilder components for working with the chosen server easily Full customization of font colors, object appearance, etc. Delphi 5-7, 2005-2007, 2009, 2010, XE, XE2, XE3 and C++ Builder 5-6, 2006-2007, 2009, 2010, XE, XE2, XE3 support |
||
|
EMS Advanced Excel Report v1.9.1.1 Full Source
|
4113 | |
EMS Advanced Excel Report v1.9.1.1 Full SourceКомментариев: 1 | Опубликовано: 6.01.2013 Категория: Delphi » Delphi-компоненты Advanced Excel Report for Delphi is a powerful band-oriented generator of template-based reports in MS Excel. Easy-to-use component property editors allow you to quickly create powerful reports in MS Excel. Now you can create reports, which can be edited, saved to file and viewed almost on any computer. Advanced Excel Report supports Delphi 5-7, 2005-2007, 2009, 2010, XE, XE2, XE3 and MS Office 97 SR-1, 2000-2010. Key Features Creating report templates directly in MS Excel Saving template as in the external *.xls file, as in the *.dfm (.exe) file Band-oriented report generator Any data source can be used Creation of master-detail reports and reports with grouping Full integration with Delphi IDE High productivity even on slow computers Detailed help system and a demo application for a quicker mastering of the product Powerful component and property editors, which allow you to set many report parameters at the design-time easily Delphi 5-7, 2005-2007, 2009, 2010, XE, XE2, XE3 and MS Office 97 SR-1, 2000-2010 support |
||
|
TEmailServer 4.2 Full Source for D5,6,7 + Demo
|
3120 | |
TEmailServer 4.2 Full Source for D5,6,7 + DemoКомментариев: 0 | Опубликовано: 3.01.2013 Категория: Delphi » Delphi-компоненты TEmailServer is a built-in SMTP server that can simultaneously validate or verify email addresses and send multiple email messages. This component is ideal for building email address validator or verifier and bulk mailer applications. As long as you have an internet connection, you can send emails from anywhere in the world. You do NOT need any external SMTP server or mess with login password to send emails messages.With advance and stable multi-threading operations, TEmailServer enables you to create multiple connections. Depending on your connection speed and bandwidth, you may be able to create as many as 90 connections simultaneously. This will enable you to validate email addresses or send email messages at a fast speed.Improved mail sending capabilities enable you to send plain text, html, embedded graphics HTML or EML messages. |
||
|
QuickReport v5.05 Pro for XE,XE2,XE3 (32/64)
|
4530 | |
QuickReport v5.05 Pro for XE,XE2,XE3 (32/64)Комментариев: 0 | Опубликовано: 31.12.2012 Категория: Delphi » Delphi-компоненты QuickReport - генератор отчетов для баз данных, полностью написанный на Delphi и объединяющий Delphi и C++Builder. QuickReport выбран компанией Borland как стандартное средство создания отчетов для Delphi и C++Builder. Стандартная редакция QuickReport включена в поставку Delphi и C++Builder. |
||
|
IBO 5.x Full Source
|
2917 | |
IBO 5.x Full SourceКомментариев: 0 | Опубликовано: 27.12.2012 Категория: Delphi » Delphi-компоненты What's new in IBO 5.x: (Note: All bug-fixes will be mentioned in the Change Log only.) Proper string support with the Delphi 2009+ unicode string being the default string type. Note: I have not gone to the level of handling 4-byte code points in the UTF-16 strings. This level of compliance will come in a future revision. I am going to have to do a major overhaul of all of my string handling routines in order to check for surrogates that throw off the byte length vs. the character length ratio being consistent throughout the entire string. Currently, if the UTF-16 based string contains a surrogate, it could throw things off and produce errors. Thus, please do not consider 3 or 4 byte code points reliable for now. Proper recognition and handling when working with UTF8 character set in the database. Note: See warning above about code points with more than 2 bytes. I enhanced cached updates with a new method UnskipUpdates so that you can pass through records in phases. In a first phase you can skip some records and then you can unskip them and go through another phase to handle them and then you can commit the updates. I also implemented the ability to acquire the TField.CurValue from the server for TIBOQuery and TIBOTable so that while you are resolving conflicts you can get access to what values are on the server. More details follow. In the process of addressing the above mentioned issue, I decided to implement the TField.CurValue property. This property utilizes the connection's transaction used by the schema cache so it will always return the most recent committed changes regardless of what the transaction isolation of the query is. There is also a timeout associated with the cached records. If it sits for over 1 second (timeout can be configured) and the value is requested again then the server will be queried again and the previous data from the server will be replaced with the new version. In the native IBO components you can access the same information using the TIB_Column.CurValue property as well. I have added a property called IB_TransForUpdates to the TIB_Statement class. Thus, all queries, etc. will be able to provide a separate transaction for all of the write operations it performs. If this property is left blank, the main IB_Transaction property will handle all reads and writes just as before. The one case where this is useful is if you want your updates to run under a read-repeatable (concurrency) isolation so that you will always be working with a consistent snapshot of the data in your trigger code. But, at the same time, you want your data queried from the server using read-committed isolation. This could not be achieved with IBO before now unless you manually did all of this on your own. I scowered the internet and gathered together all of the various versions of the IBOAdmin components and merged them all into a single group of sources and am now including them as a supported part of IBO. I enhanced the TIB_Monitor output to include transaction attributes when starting a transaction. I also added in client trace messages that accompany the transaction events so that you can tell the names of the objects in the monitor output that are in your application. I also made its string output handle special characters so that the actual contents of the string can be deciphered and so that the output wouldn't get mangled by special characters. Removed deprecated IB_StoredProc.pas unit. The contents of this unit were put into IB_Access.pas. I added TIBOArrayField so that TIBODataset can work with array columns. There is a port of IBO to Free Pascal Compiler (Lazarus) that is ongoing. Inquire if interested. There are some issues which may require some adjustments be made in your application: I changed the default value of PreparedInserts for TIBODataset from false to true. This will have an impact on the behavior of columns that have a DEFAULT value declared on the server. With PreparedInserts being true by default this will prevent server defaults from being applied due to how Firebird/InterBase does not apply server defaults if the column is included in the Insert statement, even if it has the value of NULL coming in. Because of this I have added the property GetServerDefaults. What this will allow you to do is to have the query retreive the values for the default from the server and apply them at the time the record is being inserted. This has the benefit of seeing what that value is even prior to posting the record. The XL SQL AddOn has been promoted to occupy the main source repository. This is a set of tools I contracted a developer to make so that people could have better integration with Excel spreadsheets. This set of components is still a work in progress. |
||
|
EControl FormDesinger v2.50 Full Source
|
4713 | |
EControl FormDesinger v2.50 Full SourceКомментариев: 0 | Опубликовано: 26.12.2012 Категория: Delphi » Delphi-компоненты EControl Form Designer Pro is a professional form designer that takes much after its Delphi counterpart and enables users to easily integrate fully-functional design environments into their applications. |
||
|
DiskControls port for Delphi XE3
|
3999 | |
DiskControls port for Delphi XE3Комментариев: 1 | Опубликовано: 25.12.2012 Категория: Delphi » Delphi-компоненты AppControls/DiskControls - Odds and ends for system level stuff (file searching, tray icon etc). |
||
|
MiTeC System Information Component Suite v10.9.2 Full Source-ProLaZ
|
5655 | |
MiTeC System Information Component Suite v10.9.2 Full Source-ProLaZКомментариев: 1 | Опубликовано: 23.12.2012 Категория: Delphi » Delphi-компоненты MiTeC System InformaTMiTeC_SystemInfo: gathers all following components to one for simple use TMiTeC_APM: provides informaton about Advanced Power Management TMiTeC_BT: detects Bluetooth devices using Native Bluetooth Enumerator) TMiTeC_CPU: provides detailed CPU information TMiTeC_Devices: provides devices information like Windows Device Manager TMiTeC_Disk: provides logical drive information TMiTeC_Display: provides display adapter information TMiTeC_DMA: provides direct memory acceess TMiTeC_Engines: provides information about various installed engines TMiTeC_Machine: provides informaton about computer or virtual machine, BIOS etc. TMiTeC_Media: provides media devices information TMiTeC_Memory: provides memory information TMiTeC_Monitor: provides all connected moitors information TMiTeC_Network: provides network card info, TCP/IP ad Winsock config, installed protocols, clients and services. TMiTeC_OperatingSystem: provides OS detailed information, Locale, Timezone, NT specific info, hotfixes, internet settings etc. TMiTeC_Printers: detects installed printers and their properties TMiTeC_ProcessList: collects list of running processes, services, drivers and windows and their properties TMiTeC_SMBIOS: reads SMBIOS information from memory TMiTeC_Software: provides list of installed software TMiTeC_Startup: provides list of applications that are started during system startup TMiTeC_Storage: detects S-ATA, ATA, ATAPI, RAID, SCSI, USB, Firewire storage devices and their parameters TMiTeC_USB: detects USB ports and devices and their parameters TMiTeC_DeviceMonitor: It fires event whenever any usb, firewire etc. device or volume is connected or disconnected to machine. TMiTeC_MSProduct (MSI_MSProduct.pas) added. It detects some Microsoft products installed and their product keys TMiTeC_DriveContent (MSI_DriveContent.pas) added. It scans and saves specified drive content TMiTeC_DiskMonitor (MSI_DiskMonitor.pas) added. It watches specified drive or path and fires event when specified event occurstion Component Suite v10.9.2 Full Source-ProLaZ |
||
|
Remobjects DataAbstract VCL v7.0.65.1067 Retail
|
5850 | |
Remobjects DataAbstract VCL v7.0.65.1067 RetailКомментариев: 0 | Опубликовано: 20.12.2012 Категория: Delphi » Delphi-компоненты Your Data, Everywhere. Today, it's all about the data. Data Abstract is the leading framework for secure, safe, and scalable data access across all the different platforms you might be building client applications for. Whether you are creating business applications for the enterprise, or the latest mobile application with central data storage in the cloud — Data Abstract provides you with the tools to implement both your scalable server tier and the data access inside your client applications — on Windows, Mac, iOS, Android, and just about everywhere else. Data Abstract is available for developers using .NET/Mono, Xcode, Delphi, Java/Android and javascript. |
||
|
TChromeTabs v1.0
|
4021 | |
TChromeTabs v1.0Комментариев: 0 | Опубликовано: 19.12.2012 Категория: Delphi » Delphi-компоненты Our new live network monitoring application required an up to date user interface that allowed data to be displayed and manipulated in the most intuitive way possible. We tried many different UI approaches until we settled on the modern look and feel of Chrome's tabs. We have decided to open source our implemetation to allow other developers to benefit from it's features. It is currently available for Delphi 7 through Delphi XE3 (32 and 64 bit). |
||
|
Fingertech/Nitgen SDK v4.81
|
3350 | |
Fingertech/Nitgen SDK v4.81Комментариев: 0 | Опубликовано: 19.12.2012 Категория: Delphi » Delphi-компоненты Fingertech/Nitgen SDK For Delphi/VB/.Net To develop to Fingerprint Readers Hamster DX |
||
|
TMS WebGMaps v1.5.0.1 Full Source
|
4329 | |
TMS WebGMaps v1.5.0.1 Full SourceКомментариев: 0 | Опубликовано: 19.12.2012 Категория: Delphi » Delphi-компоненты Different map modes are available: default road map, satellite view, hybrid view and terrain Extra map information can be displayed: Bicycle View, Panoramio (pictures of interest) information, Traffic information StreetView can be selected Position markers may be added to the maps, including default Google balloon markers and custom image markers. Moving over a marker can display a hint with the marker title information Extensive configuration options over the different Google maps controls are available: MapType control, OverViewMap control, Pan control, Scale control, StreetView control and Zoom control. Image files can be created of the displayed map. Images can be saved in different formats: .BMP, .JPG or .PNG Different mouse and keyboard options to enable/disable: mouse or keyboard panning, mouse or keyboard zoom, mouse wheel scrolling TWebGMapsGeocoding helper component to facilitate conversions between address and longitude/latitude coordinates |
||
|
TMS Security System v2.4.4.0 Full Source
|
3789 | |
TMS Security System v2.4.4.0 Full SourceКомментариев: 0 | Опубликовано: 19.12.2012 Категория: Delphi » Delphi-компоненты The TMS Security System facilitates the definition of user rights on a menu or form level. In its user management features the TMS Security System relies on user/group profiles stored in a database. The users can be grouped and can inherit rights in this way. Thereby you can integrate a highly sophisticated and close grained user management that closes all potential loopholes via shortcuts with minimal effort. Only if the user has been granted the specific right by the administrator he can see or use the specific function assigned by the administrator. The administrator can configure the rights at run-time thereby preventing a restart of the program when changing assignments. For doing so he can use an easy to handle, intuitive GUI that enables the administrator to create new users or to group or delete them directly from the application. |
||
|
TMS Cloud Pack 1.5.2.1 Full Source
|
5212 | |
TMS Cloud Pack 1.5.2.1 Full SourceКомментариев: 1 | Опубликовано: 18.12.2012 Категория: Delphi » Delphi-компоненты Includes  TAdvDropBox: component for access to DropBox cloud storage TAdvSkyDrive: component for access to Microsoft Skydrive cloud storage TAdvGDrive: component for access to Google Drive cloud storage TAdvTwitter: component for access to Twitter API service TAdvFacebook: component for access to Facebook API service TAdvGCalendar: component for access to Google Calendar API service TAdvURLShortener: component for access to Google URL Shortener API service TAdvLiveCalendar: component for access to Windows Live Calendar API service TAdvLiveContacts: component for access to Windows Live Contacts API service TAdvWeather: component for access to weather forecast service TAdvWeatherLocationLookupProvider: component that can perform lookup based on the available locations the Wunderground weather service provides weather data for TAdvCloudLookupEdit: edit control with lookup dropdown showing matches while typing TAdvGoogleLookupProvider: component that can perform lookup on a partial string for the most frequently used Google search terms TAdvGoogleLocationLookupProvider: component that can perform address lookup based on Google Maps address data TAdvCloudImage: component to display images from an URLFeature overview Set of VCL components to offer easy access from Windows applications to cloud services Component to get access to DropBox storage Component to get access to Google Drive storage Component to get access to Microsoft SkyDrive storage Component to get access to Facebook API Component to get access to Twitter API Component to get access to Google Calendar API Component to get access to Windows Live Contacts API Component to get access to Windows Live Calendar API Component to get access to Wundeground weather forecast service Component to display images (JPG, PNG, GIF, BMP) from an URL Component to shorten URLs based on Google URL shortener service Edit control with lookup capabilities based on web services lookup data Built-in support for OAuth 1.0 & 2.0 handling Built-in support for use of refresh tokens for use with one time authentication |
||
|
Dropbox Delphi Component with Sources
|
4932 | |
Dropbox Delphi Component with SourcesКомментариев: 0 | Опубликовано: 17.12.2012 Категория: Delphi » Delphi-компоненты Dropbox Delphi Component supports Delphi 7 and newer Delphi versions and works directly using official Dropbox API. Official API use guarantees maximum compatibility and fewest possible modifications to future versions. Features -Create and edit folders -Upload, update and download files -Move files between folders -Rename and delete files -Delta support -Unicode support -HTTPS support *preparing a package with tmssoftwares. including TMS Cloud Pack. |
||
|
N-Manager SDK 4.1 for Delphi
|
3338 | |
N-Manager SDK 4.1 for DelphiКомментариев: 0 | Опубликовано: 17.12.2012 Категория: Delphi » Delphi-компоненты N-Manager is an easy-to-use developer tool that allows you to manage network connections and settings in Windows 2000/2003/XP/Vista. With N-Manager you can: • Enumerate network adapters, get their names, guids, properties, etc. • Enable/disable adapters. • Read and change TCP/IP settings: IP, Mask, Gateway, DNS, DHCP. • Repair adapters, display properties dialogs. • Read and change adapters MAC addresses. • Manage Windows firewall. • Use "Ping" function. N-Manager provides a COM ActiveX interface for all API functions so you can easily manage network connections in VB or such .NET languages as VB.NET or C#. Using the N-Manager component, you don't have to spend your time learning how to manage network connections in Windows, sample applications for various programming languages (C++, VB.NET, C#, Delphi) with complete source code allow you to start working with N-Manager immediately! The following Windows versions are supported: • Windows 2000 • Windows 2003 • Windows XP • Windows Vista • Windows 7 Beta • 64bit versions of Windows |
||
|
Intraweb v12.2.9.1 + dcu + bpl
|
3195 | |
Intraweb v12.2.9.1 + dcu + bplКомментариев: 0 | Опубликовано: 15.12.2012 Категория: Delphi » Delphi-компоненты Develop like a VCL Forms application, but deploy to the web as standard HTML and javascript. IntaWeb is a revolutionary new way to create web-based applications. Built upon Web Solution Builder and earlier versions of IntaWeb, it extends the technology of both of these, providing an excellent tool for creating Internet, Intranet and Extranet applications in a quick and easy to maintain manner. Here is a rather new version of Intraweb for Delphi. Fixes made basd on earlier byte codes. |
||
|
Animation Splash Form
|
4131 | |
Animation Splash FormКомментариев: 0 | Опубликовано: 14.12.2012 Категория: Delphi » Delphi-компоненты Source + GDI+ dependence + SplashCreator 1.3 + Demo |
||
|
Source Code Library v2.1.0.212 USB Edition
|
6591 | |
Source Code Library v2.1.0.212 USB EditionКомментариев: 0 | Опубликовано: 14.12.2012 Категория: Delphi » Delphi-компоненты How to install the Full version (aka the USB Edition) How to install the full edition, which can be run from USB stick. ---------------------- IMPORTANT NOTES! ---------------------- There are few things to note about the full version (aka the Flash disk / USB version): •Windows Vista / Windows 7 Users: please do NOT choose program files as the destination folder if you install this edition •The only difference between both editions is the ability to launch SCL from flash disk. The rest is 100% the same. •Our build process is fully automated, so you can be sure that both editions are updated at the same frequency. •If Source Code Library is asking you to enter a key, then you are NOT using the USB edition. •Both editions (standard & USB version) cannot co-exist, so you need to remove the standard version before running the USB version installer. To install the flash disk edition, please follow these simple steps and SCL should work just fine: •Exit from Source Code Library. If Source Code Library is running in the system tray, then please do not just close its main window, but choose File --> Exit instead. •Uninstall both editions, but keep your libraries (the uninstaller will ask you about this, but it's a good idea to make a valid backup, just in case) Both editions cannot co-exist. The shortcut in the start menu/desktop points to the standard version, so it's normal that you're getting the "Enter Key" dialog. •Install the USB edition (you will have to install it just once). If you want to install it on your flash disk, just change the installer path during the setup, that's it. Otherwise, please leave the path as it is and continue the setup. •Launch the USB edition. The start menu/desktop shortcuts should point to usb_library.exe, please double check that this is the case indeed. Again, the USB edition doesn't ask for a key at all. If you face this problem, it means that you launched/installed the standard version. |
||
|
AnyDAC 6.0.3.2713 for XE2 and XE3 Installation
|
4588 | |
AnyDAC 6.0.3.2713 for XE2 and XE3 InstallationКомментариев: 0 | Опубликовано: 14.12.2012 Категория: Delphi » Delphi-компоненты AnyDAC is an unique set of Universal Data Access Components for developing database applications on Delphi, C++Builder and FreePascal. With its powerful common architecture AnyDAC enables native high-speed direct access from Delphi to Firebird, SQLite, MySQL, SQL Server, Oracle, PostgreSQL, DB2, SQL Anywhere, Advantage DB, Interbase, Access, Informix, DataSnap and more. Based on 15 years of experience writing native drivers for the database back-ends, AnyDAC was built as powerful access layer that supports all that the features needed to build real-world high-load applications. AnyDAC provides a common API for accessing different database back-ends, without giving up access to unique database-specific features, or compromising on performance. AnyDAC является уникальным набором универсальных компонентов доступа к данным для разработки кросс-СУБД приложений с использованием Embarcadero Delphi, C++ Builder и Free Pascal. Благодаря своей мощной обобщенной архитектуре AnyDAC делает возможным высокоскоростной прямой доступ ко всем основным СУБД. |
||
|
TMS Aurelius 1.7 Full Source
|
3315 | |
TMS Aurelius 1.7 Full SourceКомментариев: 0 | Опубликовано: 14.12.2012 Категория: Delphi » Delphi-компоненты What is TMS Aurelius? I've been working with Delphi and databases for years already (actually I'm this close to say "for "decades" - in plural). In database programming we all typically do the same: create SQL statements, execute it in the database and retrieve results back, using a TDataset descendant object which we use to iterate through data. I guess that just like most of you who work regularly with databases, we've all used or written at some point small, medium-size "frameworks" to make these tasks a little more simple. Functions that build the SQL statement automatically based on some parameters, client datasets that build update statements, data dictionaries, etc.. In the past months though, I have switched several large projects including projects of customers to a new framework, built from the ground up |
||
|
TMS Grid for Firemonkey for Rad Studio XE3
|
3448 | |
TMS Grid for Firemonkey for Rad Studio XE3Комментариев: 0 | Опубликовано: 11.12.2012 Категория: Delphi » Delphi-компоненты TMS Grid for Firemonkey for Rad Studio XE3 |
||
|
VisioForge Media Player SDK v2.1.5 for Delphi 6-2010
|
2752 | |
VisioForge Media Player SDK v2.1.5 for Delphi 6-2010Комментариев: 0 | Опубликовано: 11.12.2012 Категория: Delphi » Delphi-компоненты VisioForge Media Player SDK allows programmers to easily integrate video, audio and DVD playback into their software applications. It also allows you to draw overlay bitmap and text over the video with effects. |
||
|
kbmMemTable Pro v7.20.00 Full Source
|
4038 | |
kbmMemTable Pro v7.20.00 Full SourceКомментариев: 0 | Опубликовано: 10.12.2012 Категория: Delphi » Delphi-компоненты Лучшая таблица в памяти The best memory-table |
||
|
F-IN-BOX v3.54 + plus Adobe flash.ocx DXE
|
2839 | |
F-IN-BOX v3.54 + plus Adobe flash.ocx DXEКомментариев: 0 | Опубликовано: 9.12.2012 Категория: Delphi » Delphi-компоненты F-IN-BOX is a Delphi / Builder / VCL component to enhance Macromedia / Adobe Flash Player ActiveX features. It does not use its own engine to display movies but provide a wrapper around official swflash.ocx/flash.ocx code instead. Thus it is possible to avoid certain Macromedia / Adobe Flash Player ActiveX limitations. Delphi 3, 4, 5, 6, 7, 2005, 2006, 2007, 2008, 2009, 2010, XE and Builder 3, 4, 5, 6, 2005, 2006, 2007, 2008, 2009, 2010, XE are supported. Macromedia / Adobe Flash Player ActiveX 3, 4, 5, 6, 7, 8, 9, 10 are supported. |
||
|
GT Component Pack v1.0.70
|
3305 | |
GT Component Pack v1.0.70Комментариев: 1 | Опубликовано: 9.12.2012 Категория: Delphi » Delphi-компоненты GT Component Pack Version 1.0.70 Component + New Components: TgtSplashScreen : is a non visual component that can display a splash screen at the begging of the application. You can define the display duration of the splash. You can define if the screen will be automatically closed after the duration has passed or it will be closed manually by code. You can determine the position and size of the splash screen. You can load a picture to be displayed. |
||
|
Shazam Report Wizard for Delphi 7
|
2308 | |
Shazam Report Wizard for Delphi 7Комментариев: 0 | Опубликовано: 9.12.2012 Категория: Delphi » Delphi-компоненты Shazam Report Wizard (SRW) is the fastest way to create instant ad-hoc reports from your Delphi and C++ Builder applications. SRW seamlessly integrates with Shazam Power Query for the ultimate reporting experience. Imagine the freedom Shazam Report Wizard offers. End-users want their reports, their way, yesterday. With SRW, users can drag-and-drop their way to desktop publishing quality reports in minutes. For added convenience, use Reports Explorer to manage your library of reports with ease! Reports are saved to a local or client/server table without any coding on your part. Simple to use, yet very powerfull. |
||
|
Shazam Power Query for Delphi 7
|
2343 | |
Shazam Power Query for Delphi 7Комментариев: 1 | Опубликовано: 9.12.2012 Категория: Delphi » Delphi-компоненты Shazam Power Query (SPQ) is an advanced visual SQL builder for Borland Delphi and C++ Builder. SPQ is so flexible, you'll declare atabase Independence Day the first time you use it! SPQ supports the BDE, numerous BDE alternatives and all TDataset compatible controls, charting components and report writers. Mix and match your favorite VCL components with SPQ for unprecedented flexibility! SPQ also offers comprehensive end-user support. The Shazam Data Model transforms how databases appear to users. Forget table names like T0687 or CST_NMS. Just call them Customers! You can even automate table joins for the ultimate in simplicity and convenience. Shazam Power Query is used to simplify ad-hoc data retrieval for use with standard Delphi and third-party database controls. SPQ supports the Borland Database Engine (BDE) and numerous BDE alternatives. SPQ components include: TspqDataModel: The Shazam Data Model component stores table and field structures, alternate names or aliases and table relationships. Shazam implements a Data Model component for each supported database vendor. TspqDataModelDialog: The Data Model Dialog component displays the data model editor at run-time. This component is also displayed at design-time when you double-click the TspqDataModel component. Click model to see a screen shot of the Data Model Dialog. TspqPowerQuery: The Shazam Power Query component stores your visual query definition and generates SQL code. This is the heart of Shazam Power Query 4.0 and Shazam Report Wizard 4.0. TspqQueryDialog: The Query Dialog component displays the query editor at run-time. This component is also displayed at design-time when you double-click the TspqPowerQuery component. Click query to see a screen shot of the Power Query Dialog. |
||
|
Oxygen Plan Library Up to Delphi XE3
|
2788 | |
Oxygen Plan Library Up to Delphi XE3Комментариев: 0 | Опубликовано: 9.12.2012 Категория: Delphi » Delphi-компоненты By Oxygen Software. Oxygen Plan Library is the ultimate solution to build various interactive plans. Main features: Plan is composed of fully customizable objects. You get the full control over all objects behaviour in run-time.Built-in plan editing capability. Multiple layers support. Layers can be easily hide or shown, enabled or disabled. Objects blinking, highlighting and animation. Gradient filling support for all plan objects. Support for WMF, BMP, ICO, JPG and GIF (including animated) graphics. Delphi-like parent-children paradigm. Optional children clipping. Background pictures. Text rotation. Plans can be stored in files, streams and TStrings-compatible objects. DisableRepaint/EnableRepaint methods to speed up massive plan updates. Export plan to BMP, WMF, JPEG or GIF file formats. Plan can be printed either directly o a printer or using QuickReport - compatible TQROxygenPlan component. You can expand the possibilities of Oxygen Plan Library by creating your own TPlanObject descendants and registering them using class procedure TOxygenPlan.RegisterPlanObjectClass. Optional plan transparency. Plan can be painted to any canvas using PaintToCanvas method. Painting to desktop. Built-in plan objects: TPlanLine, TPlanBox, TPlanCircle, TPlanEllipse, TPlanText, TPlanPicture, TPlanPolygon, TPlanAniPicture, TPlanAniGIF, TPlanPolyLine, TPlanTraceLine |
||
|
BarMenu Components Up to Delphi XE3
|
2836 | |
BarMenu Components Up to Delphi XE3Комментариев: 0 | Опубликовано: 9.12.2012 Категория: Delphi » Delphi-компоненты BarMenu Components is a package to create menus and popupmenus with a gradient bar - like the classic start-menu. Gradient bar is drawn dynamically so you get very smooth bar with customizable colors. Alternatively you can have bitmap as a bar or even both; bitmap *and* gradient bar. Gradient bar can have dynamically created vertical caption with highlight and shadow colors. Also you can have additional bitmap (e.g. logo) on the bar. If you want you can also draw the menu bar manually through events. |
||
|
hbTapi Components 2012 v2.4 Enterprise Edition Full Source
|
3369 | |
hbTapi Components 2012 v2.4 Enterprise Edition Full SourceКомментариев: 0 | Опубликовано: 9.12.2012 Категория: Delphi » Delphi-компоненты Add telephony functions to your application... and enable it to make and answer voice or data calls, detect caller IDs, receive and generate DTMF tones, read/set the display of a phone, control the hookswitch devices and many more. The Telephony API (TAPI) is one of the most complex APIs of Microsoft Windows. hbTapi Components abstracts the API to some Delphi components which can be easily controlled by your application. hbTapi Components works through Microsoft's Telephony API to provide hardware-independence, this makes it easy to work with telephony devices from many manufacturers. It can be used with any TAPI compliant telephony hardware: low cost modems, ISDN adapters, professional telephony cards and switches etc. An applicated developed with hbTapi Components is applicable to all Windows 32- and 64-Bit operating systems with TAPI Version 2.1 or higher installed: Windows 95 (TAPI 2.1 is available as a redistributable), 98, NT (SP4), 2000, XP, Server 2003, Vista, 7 and Server 2008. Because hbTapi Components are native Delphi/C++Builder VCL components, it links directly to your EXE and no runtime libraries are needed - this keeps .EXEs small and loads fast. |
||
|
FastCube VCL Professional v1.10.3 for Delphi & BCB Full Source
|
3859 | |
FastCube VCL Professional v1.10.3 for Delphi & BCB Full SourceКомментариев: 0 | Опубликовано: 6.12.2012 Категория: Delphi » Delphi-компоненты FastCube — инструмент для оперативной аналитической обработки обширных массивов данных, позволяющий быстро и чётко проанализировать данные, получить сводные таблицы, построить графики и написать отчёты. FastCube относится к классу Desktop OLAP. FastCube is a tool for effective data analysis. FastCube enables to create various reports and diagrams instantly irrespective of the database size. FastCuhe is a handy tool for efficient analytical data arrays handling. FastCube usage for report building does not require programmer's high skill level. You can build FastCube into your applications created in Delphi or Lazarus environments by way of components' set. Connection to any datasource wich supports "TDataSet" interface. There is an opportunity to build ready-made templates for the cube and to prohibit user's scheme modification. You can export cube's cutoff into Excel, Word and HTML. All cube's settings may be performed both by program and a user. |
||
|
BusinessSkinForm VCL v10.10 (24 November, 2012)
|
3737 | |
BusinessSkinForm VCL v10.10 (24 November, 2012)Комментариев: 0 | Опубликовано: 28.11.2012 Категория: Delphi » Delphi-компоненты BusinessSkinForm VCL library help you to create applications with skins support for forms, menus, hints, many standard and DB controls. Also this library includes Office2010 skins, Ribbon UI control and Ribbon UI Application Menu. You can create your skins with special editor. Develop your business applications with BusinessSkinForm VCL! |
||
|
Greatis Ultimate PAck for Delphi 2006 - 2010
|
2972 | |
Greatis Ultimate PAck for Delphi 2006 - 2010Комментариев: 0 | Опубликовано: 27.11.2012 Категория: Delphi » Delphi-компоненты Ultimate Delphi Pack is a unique collection of components for Delphi and C++ Builder. It contains last versions of all our top-rated products: Runtime Fusion that contains Form Designer ObjectInspector Print Suite Pro WinDowse Commented Image Image Editor Delphi Bonus |
||
|
DevExpress VCL 2012 vol 1.6 + Source + Demos + Help + HTMLHelp Setup
|
9928 | |
DevExpress VCL 2012 vol 1.6 + Source + Demos + Help + HTMLHelp SetupКомментариев: 1 | Опубликовано: 27.11.2012 Категория: Delphi » Delphi-компоненты Десятки тысяч программистов со всего мира выбирают продукты Developer Express для создания своих приложений. Цель компании сохранить пользователям их время. Поэтому Developer Express создает продукты, которые обладают большой функциональностью, удобством и простотой использования. И это признано как разработчиками, так и известными журналами SDTimes, ASP.Net PRO, Delphi Informant Magazine, .NETDJ, которые проводят регулярные конкурсы наиболее популярных продуктов. В этих конкурсах продукты компании многократно становились победителями и призерами. Includes VCL components for: data entry, charting, data analysis, navigation, layout, grids, scheduling, styling, reporting, printing and planning. |
||
|
Greatis Ultimate Pack - September 12, 2012
|
3140 | |
Greatis Ultimate Pack - September 12, 2012Комментариев: 0 | Опубликовано: 27.11.2012 Категория: Delphi » Delphi-компоненты Ultimate Pack Ultimate Component Collection for Delphi 3,4,5,6,7,2005,2006,2007,2009,2010,XE,XE2,XE3 (32/64 bit) and C++ Builder 5,6 September 12, 2012 http://greatis.com/delphicb/ultimate/ What is Ultimate Pack? Ultimate Pack is a software pack which contains all our products for Delphi and C++ Builder. Runtime Fusion (with Form Designer and Object Inspector within), Print Suite Pro, Commented Image, Image Editor, iGrid Plotter, Delphi Toys, WinDowse and Delphi Bonus! All in one and all with full source codes! Over 50,000 lines of very good code, over 1.5 megabytes of source code files! |
||
|
TVideoGrabber 8.6.2.10 VB6, DotNet and for D5-DXE3 All in One
|
4564 | |
TVideoGrabber 8.6.2.10 VB6, DotNet and for D5-DXE3 All in OneКомментариев: 0 | Опубликовано: 23.11.2012 Категория: Delphi » Delphi-компоненты v8.6.2.10 - November 16, 2012 added 64bit OCX component available (vidgrab_NET_x86.ocx and vidgrab_NET_x64.ocx OnMouseEnter/OnMouseLeave events WPF component available: VideoGrabberWPF control of the VidGrabNoForm namespace (look at the WPFQuickStartDemo demo project for sample code) fixed player trackbar may stop working after invoking RunPlayer() changing PlayerSpeedRatio during playback makes the clip restart from 0 AVISynth scripts may crash in some cases possible crashes with some Intel graphic chipsets possible crash or recorded clip corrupted when stopping the recording C#/VB .NET DLL: some events may not be raised when using VideoGrabber component from the VidGrabNoForm namespace VideoSource = vs_Mixer: sync problem when recording the mixer with an audio capture device and VideoRenderer = vr_None |
||
|
Cindy components v5.11.1 for all Delphi versions
|
2720 | |
Cindy components v5.11.1 for all Delphi versionsКомментариев: 0 | Опубликовано: 22.11.2012 Категория: Delphi » Delphi-компоненты Description - Gradient controls (buttons, speedbuttons, panels) with features like colored bevels, wallpaper, shadowText, caption orientation etc... TcyCommunicate and TcyCommRoomConnector allows communication between applications running in same computer session. TcySearchFiles and TcyCopyfiles allow respectively search and copy files with pause/resume/abort features. TcyResizer allow move and resize components at run-time like delphi 2009 does. Advanced DBX components for easy table data handling (tcyDbxTable), schema modifications (TcyDbxUpdateSql) and reconcile handling (TcyDBXReconcileError) TcyMathParser can parse matematical expressions. TcyWebBrowser allows view/edit html documents. DBGrids with advanced feature. TcyDocER extract document information (mail, phone, amounts etc ...) using OCR results from any source like Tesseract (open source) or Transym (comercial but cheap, fast, easy and powerful). TcyBook allow to see images in a virtual book with turn page effect etc... |
||
|
FIBPLUS 7.4.1731 XE2-XE3 Re-Pack with Editors/Tools and CORRECTIONS
|
5271 | |
FIBPLUS 7.4.1731 XE2-XE3 Re-Pack with Editors/Tools and CORRECTIONSКомментариев: 0 | Опубликовано: 21.11.2012 Категория: Delphi » Delphi-компоненты FIBPlus - это библиотека компонентов, предназначенная для работы с InterBase и Firebird. Она предоставляет быстрый, прямой и удобный доступ к базам данных Borland InterBase и Firebird при работе с Delphi, C++ Builder, Ada и Kylix. FIBPlus поддерживает Delphi 5-7, Delphi 2005-2010, C++ Builder 5-6, C++ Builder 2006-2010, RAD Studio XE-XE3, Kylix 3, gnat-3.15p, gnat2006 GPL и все версии InterBase 4.х-7.x, InterBase 2007-2009 и Firebird 1.x.-2.x |
||
|
DevComponents DotNetBar 10.9.0.4 + patch
|
3228 | |
DevComponents DotNetBar 10.9.0.4 + patchКомментариев: 0 | Опубликовано: 18.11.2012 Категория: Delphi » Delphi-компоненты New Releases New: SuperGrid: Added support for Group header row size set to 0. New: SuperGrid: Added Filter.ActivateFilterEdit(GridColumn column) to enable programmatic activation of the specified column's Filter Edit control. New: SuperGrid: Added gridPanel.ActivateFilterPopup(GridColumn column) to enable programmatic activation of the specified column's FilterPopup. New: SuperGrid: Added gridColumn.ActivateFilterPopup() to enable programmatic activation of the column's FilterPopup. New: SuperGrid: Added IsActiveCell property. New: Event Source added to Value Change events on SliderItem Fixed: SuperGrid: Fixed recently introduced mouse cell highlighting issue. Fixed: SuperGrid: Fixed an issue where inserting a row into a bound DataSource would not take grouped rows into account. Fixed: SuperGrid: Data binding change to better support linked BindingSources. Fixed: SuperGrid: GridSwitchButtonEditControl now, by default, utilizes StyleManager. Fixed: LabelItem with Metro style might use wrong text color when on toolbar Fixed: Ribbon Backstage tab sizing improved so right and bottom most pixels are not lost after form is restored from maximized state and backstage was open in maximized form state |
||
|
FibPlus v7.4 Full Source (support XE3) (2012-10-21)
|
4875 | |
FibPlus v7.4 Full Source (support XE3) (2012-10-21)Комментариев: 0 | Опубликовано: 17.11.2012 Категория: Delphi » Delphi-компоненты FIBPlus - это мощная и в тоже время простая и удобная библиотека компонентов для Delphi, C++ Builder, Kylix и Ada для прямого доступа к InterBase и Firebird. Мы стараемся разрабатывать ее в соответствии с пожеланиями наших пользователей; каждый компонент, метод и свойство предназначены для решения задач, с которыми каждый из вас сталкивается практически каждый день. Description FIBPlus - is a powerful and yet simple and convenient component library for Delphi, C + + Builder, Kylix and Ada for direct access to InterBase and Firebird. We try to develop it in accordance with the wishes of our users, and each component, method and property are designed to address the challenges that each of you face every day. Advantages of FIBPlus Using FIBPlus in your applications, you get a number of important advantages, such as: • Supports all versions of InterBase starting with 4.0 and Firebird 1.0 (including Embedded Firebird) • Applications on FIBPlus do not require installation of additional software (drivers, BDE, ODBC, etc.) except the client software (gds32.dll, fbclient) • Compatible with all standard and third-party db-visual components and report generators (TDBEdit, TDBGrid, TDBChart, ..., InfoPower, DevExpress, EhLib, IntraWeb, ASTA, FastReport, QuickReport, Report Builder, Context Database Designer, TMS Scripter Studio, TMSAdvDBGrid, DataAbstract, Fast Query Builder, Rave Report, Rubicon, Jazmine (JCW) ...) • Improved performance in comparison with analogues. In particular, TpFIBDataSet works 30-40% faster than TIBDataSet IBX, uses 60-70% less memory and is 3-4 times faster with lookup-fields. • Optimization of data exchange. FIBPlus has a number of tools to reduce network traffic, such as caching of metadata operations on entries in the local buffer without recourse to the server, packing of BLOB-fields with the help of the local BLOB-filters, re-use requests avtomodifikatsiya updating requests, etc. • Unique features: repository configuration fields, queries, bug reports, centralized exception handling, support for Unicode, and much more. |
||
|
ResizeKit2 - D7/D2007/D2009/D2010/ DXE/RADXE2/RADXE3 Registered
|
4338 | |
ResizeKit2 - D7/D2007/D2009/D2010/ DXE/RADXE2/RADXE3 RegisteredКомментариев: 0 | Опубликовано: 16.11.2012 Категория: Delphi » Delphi-компоненты The ResizeKit is a form resizing component that makes applications size and screen resolution independent in one easy step. Simply attach the ResizeKit to your form and automatically resize any or all controls and fonts without writing a single line of code. By setting a few simple properties or by hooking into the ExitResize event, you can easily customize the resizing process to work with nearly all types of applications. The ResizeKit can even resize most third party controls. Use the ResizeKit from the first day on new programs and of course on established programs without changing the program design or code. The ResizeKit license is royalty-free for application development and royalty-free for runtime applications. |
||
|
Debenu Quick PDF Library v9.12 with License
|
3521 | |
Debenu Quick PDF Library v9.12 with LicenseКомментариев: 0 | Опубликовано: 15.11.2012 Категория: Delphi » Delphi-компоненты Quick PDF Library is a powerful royalty-free PDF toolkit for adding PDF functionality to your applications. It lets you create, render, print, secure, merge, split and manipulate PDF files with only a few lines of code. Support is provided for the most popular programming languages through ActiveX, DLL, LIB, TCP and Delphi editions of the library. With a comprehensive set of PDF API functions designed to make working with PDF files on all levels quick and easy — Quick PDF Library has got you covered. Create PDFs on the fly Render and print PDFs Generate PDF/A documents Secure, sign and protect PDFs PDF forms and javascript Split and merge PDFs Extract text and images PDF metadata Add text, images and graphics Barcodes Annotations, bookmarks and links Geospatial PDF |
||
|
TeeChart Pro VCL 2012.07.121105 for Delphi & C++Builder 5-XE3 Trial 2 Retail
|
4899 | |
TeeChart Pro VCL 2012.07.121105 for Delphi & C++Builder 5-XE3 Trial 2 RetailКомментариев: 1 | Опубликовано: 9.11.2012 Категория: Delphi » Delphi-компоненты TeeChart Pro VCL / CLX является одним из ведущих графиков и графический инструмент, который был разработан в рамках интерактивного процесса в соответствии с требованиями заказчика и инноваций с 1997 года. TeeChart Pro предлагает сотни стили Графика в 2D и 3D, 40 математических и статистических функций для вас выбор вместе с неограниченным числом осей и 22 Палитра компонентов. Она включает в себя мощный редактор и полное диалоги почти для каждого компонента и суб-компонентов, позволяющий быстро дизайна графиков сложных приложений. Диаграмму редактора еще более усиливается компонент TeeCommander (панель инструментов с кнопками конкретные диаграммы), которая обеспечивает одну кнопку доступа к TeeChart редакторы и общие черты. Эти редакторы доступны как на время разработки, а также во время выполнения. TeeChart Pro разделен на модули (блоки) для уменьшения размера исполняемого и является полностью объектно-ориентированным. Это также позволяет разработчикам создавать собственные пакеты в группу модулей, а в своих собственных потребностей. Другим основным преимуществом является то, что код упорядочены максимально увеличить внутреннее скорости. TeeChart графического кода прямо говорится о Windows GDI API и хранения данных в динамические массивы. Всесторонняя помощь и поддержка для TeeChart Pro легко доступны через обширные технические ресурсы, доступные для Вас. |
||
|
IBObjects Version 4.9 Release 14 [Build 53] Full Source XE3 support
|
2137 | |
IBObjects Version 4.9 Release 14 [Build 53] Full Source XE3 supportКомментариев: 0 | Опубликовано: 7.11.2012 Категория: Delphi » Delphi-компоненты 10/10/2012 Version 4.9 Release 14 [Build 53] This is the full source to all of the modules of the InterBase Objects Version 4.x Component Suite. -IBO4_9_14_Installer.zip(3.08 mb) 10/11/2012 3:28:27 AM -IBO4_9_14_b53_RawSource.zip(3.29 mb) 10/11/2012 3:28:52 AM -ReleaseNotes.rtf(137 kb) 10/11/2012 3:27:58 AM -IBO45_CompHelp.zip(2.74 mb) 11/3/2004 7:07:28 AM -IBO46_Help.zip(2.37 mb) 2/14/2006 -IBO46_HelpBrowser.zip(391 kb) 2/14/2006 -HowToInstallRawSource.txt(21.2 kb) 2/19/2003 4:16:40 PM -FTS_Help.zip(282 kb) 8/15/2001 12:57:44 AM -RPL_Help.zip(501 kb) 8/10/2001 8:33:54 AM -RPL_BlobCompare.zip(77.3 kb) 8/10/2001 8:41:34 AM -RPL_BlobCompare.tar(70.0 kb) 8/10/2001 8:42:08 AM Getting Started Guide 1.2 -GettingStarted.pdf(2.79 mb) 12/7/2011 |
||
|
Clever Suite Internet v7.6 Full Source
|
3274 | |
Clever Suite Internet v7.6 Full SourceКомментариев: 0 | Опубликовано: 7.11.2012 Категория: Delphi » Delphi-компоненты New Features •RAD Studio XE3 / Delphi XE3 and C++Builder XE3 support; •TLS1.1 and TLS1.2 support was implemented; •Full 64-bit support; •Full IpV6 support was implemented; •SOAP: Crypto PRO support was implemented; •DnsQuery / DnsServer - AAAA records were added; •Soap - Timestamp, Addressing and SOAP WSDL were implemented; •Http - the ability to cancel request and reset the connection; •Smtp - receiving an information about message size limit; •Smtp - starting from now you can send messages with long text lines which are greater than BatchSize property; •Encoder - displaying of progress information was improved. New Components |
||
|
BoxedAPP SDK v3.0.9.5
|
3279 | |
BoxedAPP SDK v3.0.9.5Комментариев: 0 | Опубликовано: 6.11.2012 Категория: Delphi » Delphi-компоненты BoxedAPP SDK 3.0.9.5 |
||
|
ReportBuilder Enterprise/Professional v14.07 D7/XE/XE2 Registered Version
|
3731 | |
ReportBuilder Enterprise/Professional v14.07 D7/XE/XE2 Registered VersionКомментариев: 1 | Опубликовано: 5.11.2012 Категория: Delphi » Delphi-компоненты Известный генератор отчетов. В представлении не нуждается. With ReportBuilder Professional, you get everything included in ReportBuilder Standard, plus a set of components that enables end-users to perform the data access, report layout, and report output activities of the reporting equation. |
||
|
ReportBuilder Enterprise/Professional v14.07 XE3 Registered Version
|
3125 | |
ReportBuilder Enterprise/Professional v14.07 XE3 Registered VersionКомментариев: 3 | Опубликовано: 4.11.2012 Категория: Delphi » Delphi-компоненты Известный генератор отчетов. В представлении не нуждается. With ReportBuilder Professional, you get everything included in ReportBuilder Standard, plus a set of components that enables end-users to perform the data access, report layout, and report output activities of the reporting equation. |
||
|
TCrossDB with sources (for D7-XE)
|
2738 | |
TCrossDB with sources (for D7-XE)Комментариев: 0 | Опубликовано: 3.11.2012 Категория: Delphi » Delphi-компоненты TCrossDB with sources (for D7-XE) |
||
|
nrComm Lib v9.27 to XE3
|
3602 | |
nrComm Lib v9.27 to XE3Комментариев: 0 | Опубликовано: 2.11.2012 Категория: Delphi » Delphi-компоненты The nrComm Lib is set of Delphi VCL components, classes and routines for serial communication tasks. Library helps to get access to various devices: serial port, data and voice modems, barcode scanners, Human Interface Devices (HID), Bluetooth, USB, LPT, GSM, GPS and others. It provides solution for quick implementation almost any packet data protocol. It can work with sound and speech. Library allows send SMS messages over connected mobile phone (GSM terminal) and much more. |
||
|
MSSQL Maestro Professional v12.9
|
3092 | |
MSSQL Maestro Professional v12.9Комментариев: 0 | Опубликовано: 1.11.2012 Категория: Delphi » Delphi-компоненты Software name : MSSQL Maestro Version : 12.9 Release Type : Professional Edition Last Updated : 19 September 2012 2:52 PM OS Support : Windows 2000/XP/2003/Vista/7 Developer : SQL Maestro Group Web-site : http://www.sqlmaestro.com/ MSSQL Maestro is the premier SQL admin tool for MSSQL database management, control and development. MSSQL.Maestro.Professional.v12.9.Cracked.by.yoza[UpK] |
||
|
Cindy Components v4.42 for All Delphi
|
2512 | |
Cindy Components v4.42 for All DelphiКомментариев: 0 | Опубликовано: 31.10.2012 Категория: Delphi » Delphi-компоненты Packages with 59 components for all delphi versions to build windows applications: gradient controls (buttons, speedbuttons, panels), dbgrids, DBX components, db controls, web browser etc... TcyResizer component allows resizing controls as Delphi 2009 IDE does. TcyDocER extract document information (mail, phone, amounts etc ...) using OCR results from any source like Tesseract (open source) or Transym (comercial but cheap, fast, easy and powerful). |
||
|
Zipforge 6.10 Delphi 2009 - XE3 32 Bit
|
3705 | |
Zipforge 6.10 Delphi 2009 - XE3 32 BitКомментариев: 0 | Опубликовано: 31.10.2012 Категория: Delphi » Delphi-компоненты ZipForge is a fast and powerful VCL Zip component, written in Delphi. It lets you easily create ZIP archives, extract files from zip files to hard drive or memory, add files to a zip archive from disk or memory, replace, move and delete files in zip archives. Also it creates and reads self-extracting (SFX) zip archives, AES encrypted and multi-volume zip files. ZipForge main features: Opens and creates archives encrypted with strong AES encryption algorithm Zip64 supports - lets you create ZIP files over 4 GB Unicode file names support Includes transaction system which allows you to rollback changes if archive update failed Adds compressed data directly from streams and extracts archived files to streams without creating temp files Lets you store full path with drive for each file Allows to search for files inside archive by mask Progress indication |
||
|
Sisulizer 3 Enterprise v3.335
|
2855 | |
Sisulizer 3 Enterprise v3.335Комментариев: 0 | Опубликовано: 31.10.2012 Категория: Delphi » Delphi-компоненты Sisulizer – This program is designed to contain a variety of software. The localization process is performed by scanning applications and identify all parts of the text. Support the work directly to C + + Builder, Delphi, Visual C + +, Visual Basic, java, XLIFF. Allows you to visually work with HTML and XML, as well as selected text from text files and databases. Program are providing support for mobile applications:. NET for Smart Devices, Pocket PC, Windows mobile, Symbian, and J2ME. After the scan is converted text using the visual editor and then save the project with localization. After installation, you can immediately begin to transfer your favorite, but not localized program – you are only required knowledge of languages. This program has a feature Taxpayers text, but this possibility will be useful only for transferring small phrases. The program is intuitive and multilingual interface, with support for many languages, including Russian. Localization of software allows your design to enter the broader market of consumers, thereby increasing your revenues, the popularity of your software and the influx of new users. With this useful, easy and convenient program, you can do a quick translation of its software on a host of other languages, having spent a minimum of effort, time, and getting a good final result. Localization of software, with the help of this program is in three stages: the first step – scanning applications and identify all parts of the text. Sisulizer can work directly with C + + Builder, Delphi, Visual C + +, Visual Basic, Java, Windows, or a binary file, or with XLIFF. Sisulizer works visually with HTML and XML. Features: Scanning applications and translate the entire text will automatically -Localization of HTML and XML -Support in C + + Builder, Delphi, Visual C + +, Visual Basic, java, XLIFF -Support for mobile applications:. NET for Smart Devices, Pocket PC, Windows mobile, Symbian, and J2ME -Scan all text files, even those that are not supported -Ability to transfer only the part that has changed Supports file formats:. NET assembly,. NET resource, CodeGear. NET, C + + Builder, Delphi binary file, HTML, Ini, Java, JBuilder, PO / POT / MO, and many others Supports databases: Access, Access 2007, ADO / ODBC, dBase, DBISAM, Interbase, MySQL, Oracle, Paradox, SQL Server, Firebird -Translation of the text with built-in visual editor -Full support for pages with all existing encodings -Full support for Asian languages |
||
|
EMS Advanced Data Import VCL v3.7.0.2 Full Source
|
5994 | |
EMS Advanced Data Import VCL v3.7.0.2 Full SourceКомментариев: 1 | Опубликовано: 30.10.2012 Категория: Delphi » Delphi-компоненты Advanced Data Import VCL is a component suite for Borland Delphi and C++ Builder that allows you to import data from files of the most popular data formats to the database. You can import data from MS Excel, MS Access, DBF, XML, TXT, CSV, ODF and HTML. There will be no need to waste your time on tiresome data conversion - Advanced Data Import will do the task quickly, irrespective of the source data format. Key Features: - Data import from the most popular data formats: MS Excel 97-2007, MS Access, DBF, XML, TXT, CSV, OpenDocument format (ODF) and HTML - Import of Unicode data (UTF-8, UTF-16/UCS-2, UTF-32/UCS-4). Automatic detection and manually preset text encoding for imported data - Powerful component and property editors, which allow to set many import parameters at the design-time easily - High productivity even on slow computers - Adjustable parameters for each type of import - 100% native Delphi code for MS Excel 97, DBF, TXT, CSV - no additional libraries or programs needed for the components to work. OLE, DDE, BDE etc not required either - Detailed help system and a demo application for a quicker mastering of the product - Delphi 5-7, 2005-2007, 2009, 2010, XE, XE2, XE3 and C++ Builder 5-6, 2006-2007, 2009, 2010, XE, XE2, XE3 support |
||
|
EMS Advanced Data Export VCL v4.8.1.1 Full Source
|
3434 | |
EMS Advanced Data Export VCL v4.8.1.1 Full SourceКомментариев: 0 | Опубликовано: 30.10.2012 Категория: Delphi » Delphi-компоненты Advanced Data Export VCL is a component suite for Borland Delphi and C++ Builder that allows you to save your data in the most popular data formats for the future viewing, modification, printing or web publication. You can export data into MS Access, MS Excel, MS Word (RTF), Open XML Format, Open Document Format (ODF), HTML, XML, PDF, TXT, DBF, CSV and more! There will be no need to waste your time on tiresome data conversion - Advanced Data Export will do the task quickly and will give the result in the desired format. Key Features: - Data export into 17 most popular formats: MS Access, MS Excel, MS Word, Open XML Format, Open Document Format (ODF), RTF, HTML, XML, PDF, TXT, DBF, CSV, SYLK, DIF, LaTeX, SQL and Windows Clipboard - Delphi 5-7, 2005-2007, 2009, 2010, XE, XE2, XE3 and C++ Builder 5-6, 2006-2007, 2009, 2010, XE, XE2, XE3 support - Export of Unicode data. Manually preset text encoding for exported data (UTF-8, UTF-16/UCS-2, UTF-32/UCS-4, Latin1, Latin2, Latin5, Latin7 and more) - Saving data for future viewing, modification, printing or web publication - Easy-to-use wizard allows your end-users to export data quickly - Powerful export options for each data format - 100% native Delphi code - No additional libraries or software required to operate - Detailed help system and demo application - Powerful components and properties editors - Setting the user formats for each field separately - Multilanguage support |
||
|
D O M S - 5 0 0 0 Interface components, manuals and demo
|
3397 | |
D O M S - 5 0 0 0 Interface components, manuals and demoКомментариев: 0 | Опубликовано: 30.10.2012 Категория: Delphi » Delphi-компоненты D O M S - 5 0 0 0 is controller (device) used by most gas stations in EU (for controlling pumps, tank probes, auto-wash line etc.). This package contains drivers and type libraries (components) for interfacing that controller, also PDF manuals and DEMO app. So if you are developing POS app for gas stations or plane to do so this is what is needed. This components are type libraries, so you must use type library import tool in Delphi (or Visual Studio). |
||